ComLab Two Way 90 Degree Bench Mounted Laboratory Tap - Needle Valve
Enware's ComLab Dry Media outlets are supplied with a tapered tube nozzle and are assembled for each specific media type. The durable powder coat finish gives significant protection against corrosion, discolouration and surface damage. ComLab handles are ergonomically designed for precise feel and finger tip control. Handles are colour coded for easy service identification and use complimentary buttons.
Suited for dry media up to technical gas level 2.0 (with isolation valve), 4.0 (without isolation valve) and higher upon request
The durable powder coat finish gives significant protection against corrosion, discolouration and surface damage
Ergonomic design for finger tip control; metal handle; colour coded with button for media identification to DIN EN 13792
1/2" BSP male inlet tail with 3/8" BSP female internal thread; includes Backnut, anti-rotation pin and o-ring for surface seal
Isolation valve optional for easier service and maintenance and teflon needle valve with stainless steel seat
Tube nozzle; 45 degree Tube nozzle is available on request
Enware products are to be installed in accordance with the Plumbing Code of Australia and AS/NZS3500.
**1/4" Female available - request when ordering.
NOTE: Enware Australia advises: 1. Due to ongoing Research and Development, specifications may change without notice. 2. Component specifications may change on some export models.