WC Flushing System with Touch Activation - Dual Flush Rear Access
Enware's WC flushing systems provide a neat and reliable flushing solution using piezoelectric technology particularly suited for public access applications. Uses a WaterMarked solenoid that when combined with an appropriate pan delivers either a 3/6L or 3/4.5L flush.
Best suited for duct style installation (Flush unit and activation plate MUST be separated).
Semi concealed installation with a stainless steel panel and security screws. Shut off valve, filter and airbreak included. Suitable for AS1428.1 applications.
700mm (+/- 100mm) of 1 1/2" (40mm) flush pipe is required below the air break.
Single Flush Water Supply Working Pressure
Dual Flush Water Supply Working Pressure
Note: a maximum of 1x90 degree bend is to be used in the flush pipe. 45 degree bends are preferred. For installation outside of this parameter please contact your Enware representative. * Enware products are to be installed in accordance with the Plumbing Code of Australia and AS/NZS3500. Enware Australia advises: 1. Due to ongoing Research and Development, specifications may change without notice. 2. Component specifications may change on some export models.