• ATM621.jpg

Aquablend eSQX Touch Free - Mains Powered Point of Use Thermostatic Wall Mixer

Aquablend eSQX is Australia's first and most technically advanced touch free point of use thermostatic mixer solution delivering touch free controlled temperature heated water. Designed for effective reduction of Legionella risk. Features flush cycles and smooth bore spout design. The point of use TMV also minimises warm water legs and is AS4032.1 WaterMark certified. Adjustable temperature range for user comfort. AHFG Type A and B healthcare basin compatibility. Smart, durable easy-clean chrome surfaces and sealed face plate minimises egress of moisture into wall cavity and contaminated air flow from wall cavity into sterile areas. Mains supply in wall component can only be paired with the Mains powered Active Sense (ATAM) and Wave On - Wave Off (ATWM) front of wall components.

Key features

  • 12V mains supply
  • 12-hour flush cycle eliminates stagnation in water supply lines greatly reducing the risk of bacteria growth
  • Sealed face plate minimises egress of moisture into wall cavity and contaminated air flow from wall cavity into sterile areas
  • Back and front of wall components are separate order codes and can be supplied separately to meet construction needs
  • Face plate removes to access integral isolation/check valves, strainers and inspection ports for TMV servicing requirements
  • IP67 rated connections
  • Products

    Order code Aquablend eSQX Touch Free - Mains Powered Point of Use Thermostatic Wall Mixer
    ATM621
    Back of Wall Component for Mains Powered Models (ATAM and ATWM)
  • Dynamic Inlet Pressures* 20 - 500 kPa (For optimum operation it is recommended that the hot and cold water supply pressures be balanced within +/- 10%)
    Static Inlet Pressures Maximum 1000kPa For testing purposes/system commissioning
    Hot Temperature Supply Range 55-85 C
    Cold Temperature Supply Range 5-25 C
    Minimum Temperature Differential (between hot supply and the outlet temperature) 10 C
    Adjustable Thermostatic Temperature Range* 35-46 C (+/-2)
    Minimum Flow Rate 2L/min
    * Enware products are to be installed in accordance with the Plumbing Code of Australia and AS/NZS3500. NOTE: Enware Australia advises: 1. Due to ongoing Research and Development, specifications may change without notice. 2. Component specifications may change on some export models.
  • ATM621 Line Drawing
  • Document type File type
    Brochure eSQX Aquablend Electronic Sequential Thermostatic Mixer
    Installation guide pdf
    PDF Dimensional Drawings ATM621
Email Us